Playstation 4 Usb Port Repair

Playstation 4 Usb Port Repair. One of the most common sony playstation 4 issues that we see at cpr cell phone repair is damaged or malfunctioning hdmi ports. How do we repair a ps4 slim usb port fault?

Double usb connector port for ps4 sony playstation 4 slim
Double usb connector port for ps4 sony playstation 4 slim from www.fruugo.co.uk

Always gentle, plugging and unplugging everything. As a result, the ps4 usb ports won’t work properly or at all. If you want to do it yourself, make sure you know how to solder.

Book This Service, Package Your Machine Securely And Look Out For Our Email With Further Instructions.

If you turn the ps4 over (make sure the bottom case is off) you will be able to see the bottom of the usb ports. At the largest width of the outer connector, you will see is has two corners on each side, the center of the header is supposed to be aligned with the top most corner(top being largest width side) but the ps4 controllers are aligned at the bottom. Slightly pushing the 4 little metal prongs upwards towards the gold connectors seems to have worked!

We Will Replace The Entire Port.

Remove the hard drive tray. From there we desolder the old usb port. The ps3 systems has all of the pins and legs being held down on one side of the board.

Fortunately, Our Expert Technicians Have The Skills And Knowhow To Quickly Clean And Replace Playstation Hdmi Ports.

This repair service is to fix any port related issue with the sony ps4 playstation 4 machine and is to repair one port only. To repair this fault we need to carefully strip the console down to the motherboard. All of these options are a difficult repair.there is just no easy way to fix them.

Please Check Which Board Your Controller Uses As There Are Many Variations Used Among The Series Of Playstation 4 Controllers By Opening The Controller Up And Comparing To The Images Of Each Board Listed Here.

To repair this fault we need to carefully strip the console down to the motherboard. Replacing a ps4 usb port isn’t easy, it’s going to take a soldering iron. If the original port is really badly yanked this can cause damage to the motherboard and in some circumstances could be beyond repair (although that is very rarely the case).

Back Usb Port Works Fine.

Suite c chantilly, va 20151 Unplug the cables that were located under the power supply and unscrew the black screw next to it. Or the micro usb port is damaged then get one of these replacement circuit boards to fix it back to functional conditional.